search-loading

Type FSL-B-SEK


Decentralised ventilation systems type FSL-B-SEK dissipate thermal loads and be operated without external air.
They are used mainly for heating and cooling of spaces.

FSL-B-ZAB
Secondary air units:

  • Secondary air unit (SEK) for dealing with thermal loads
  • Heat exchanger for heating and cooling
  • Under sill installation
  • Quasi displacement flow
  • Energy efficient radial flow fans
  • Controlled/limited fresh air flow rate independent of wind pressure
  • Low sound power level

FSL-B-SEK
Legend

1 Coarse dust filter G3
2 Sound attenuator
3 EC-radial Fan
4 Air heater
5 Chiller

SEC Secondary air
SRS Supply air single room
For air support, the device includes a fan. The fan sucks in the air and promotes it through the heat exchanger for air heating and cooling. A coarse dust filter protects the fan and heat exchanger from pollution. The secondary air flows as a displacement flow through the ventilation grille in the room.
FSL-B-SEK
Under sill ventilation units type FSL-B-SEK are used for decentralised ventilation and
for heating and cooling of rooms and buildings. The devices are manufactured
according to specific project-site conditions. The under sill units consist of a casing of
galvanized sheet steel, which axle is integrated into the façade.
The units are attached to the concrete sill.

 

Downloads Group Type Ident-No. Type / Size
         
Traungasse office building - Decentralised sill ventilation units FLS-B-ZAB / SEK Decentralized Ventilation Systems Project Information PI/FSL/15/EN/1 PDF / 352 KB 

Reference

Distrito de la Comunicación de Telefónica

More than 30,000 TROX chilled beams of DID300B type
Reference

Contact

TROX Malaysia Sdn Bhd.

20 Persiaran Bunga Tanjung 1
Senawang Land Industrial Park
Tel: (+6) 06-678 8188
Contact and locations